home *** CD-ROM | disk | FTP | other *** search
- OSIN5BDS - 5.25" DISKETTE INSTALLATION FOR WARP
- 10/28/94
-
- ================================================================
- 5.25" DISKETTE INSTALLATION FOR WARP
- ================================================================
-
- Please Read Entire Document for Full Explanation of Procedures
- ----------------------------------------------------------------
-
- The following procedures are for a system with 5.25" 1.2MB A:
- Drive and 3.5" 1.44MB B: Drive.
-
-
- NOTE: You need two 5.25" diskettes for this procedure.
- Label one OS/2 WARP 525 DISK 0 and the other OS/2 WARP 525
- DISK 1.
-
- 1. Start the system from DOS.
-
- 2. Insert the 525 DISK 1 into Drive A:. From the C:\> prompt,
- type:
- FORMAT A: /U and press Enter
-
- 3. When prompted for the volume label, type:
- DISK 1 and press Enter.
-
- 4. From the C:\> prompt, type the following, pressing Enter
- after each.
- MD CDINST
- CD CDINST
- MD DISK0
- MD DISK1
- CD DISK1
-
- 5. Insert the 3.5" WARP Diskette 1 in Drive B. Type the
- following, pressing Enter after each.
- COPY B:\*.*
- DEL BUNDLE
- COPY *.* A:\
-
- 6. Insert the 3.5" WARP Install diskette in Drive B:
-
- 7. Insert the 525 DISK 0 in Drive A: and type:
- FORMAT A: /U and press Enter.
-
- 8. When prompted for the volume label, type:
- DISK 0 and press Enter.
-
- 9. Type the following, pressing Enter after each:
- CD..
- CD DISK0
- COPY B:\*.*
- DEL BUNDLE
-
- 10. Type:
- DEBUG and press Enter.
-
- 11. From the - prompt, type the following, pressing Enter after
- each.
- L DS:0 1 0 1
- E 13 60
- E 14 09
- E 15 F9
- E 16 07
- E 18 0F
- W DS:0 0 0 1
- Q
-
- COPY *.* A:\
-
- 12. Remove the WARP Installation diskette from B: and restart the
- system to begin the install.
-
- 13. Insert OS/2 WARP 525 DISK 1 when prompted to insert DISK
- 1 and follow the prompts.
-